Calculators

Shutter Speed Calculator

Calculate an equivalent shutter time from a starting shutter speed and the change in exposure measured in stops. A positive change lengthens the exposure, while a negative change shortens it.

Loading calculator...

What this Shutter Speed Calculator does

This Shutter Speed Calculator estimates an equivalent exposure time from a starting shutter time and a change in exposure measured in stops. A positive stop change doubles exposure time for each stop, allowing more light to reach the sensor. A negative change halves the time for each stop. The result is shown in seconds, which is the unit used by the calculation.

For example, if a starting time is 1/100 second, or 0.01 seconds, and the exposure change is one stop, the calculation gives 0.02 seconds. That is equivalent to 1/50 second. A two-stop increase gives 0.04 seconds, equivalent to 1/25 second. The tool uses the formula starting time × 2 raised to the stop change.

This is an exposure-time conversion. It does not measure a scene, select an aperture or ISO, evaluate motion, or account for a particular camera's available shutter increments. It gives a mathematical equivalent that you can compare with the shutter options on your camera.

How to use the Shutter Speed Calculator

Enter a starting shutter time in seconds, then enter how many stops you want to add or subtract. The starting time must be greater than zero. For a common camera setting such as 1/125 second, divide 1 by 125 and enter approximately 0.008 seconds. The stop change can be positive, negative, or zero.

  • Starting shutter time: the exposure duration you are adjusting, in seconds.
  • Exposure change: the number of stops to apply. Use a positive value to lengthen the time and a negative value to shorten it.
  • Equivalent shutter time: the calculated duration, displayed in seconds.

For a worked example, start at 0.01 seconds, equivalent to 1/100 second, and add 1.5 stops. The formula is 0.01 × 21.5. Since 21.5 is about 2.828, the result is about 0.0283 seconds, or roughly 1/35 second. The calculator retains a decimal result so you can judge the equivalent time even when it falls between common camera settings.

To reverse an adjustment, use the same magnitude with the opposite sign. If you lengthened a time by two stops, entering a change of minus two stops from that new time returns to the original duration, subject to rounding.

How the Shutter Speed Calculator formula works

A stop represents a factor of two in exposure. Doubling shutter time lets the sensor receive light for twice as long, which is a one-stop increase from shutter time alone. Halving the time gives half as much exposure time, a one-stop decrease. For changes that are not whole stops, the formula uses powers of two to calculate the proportional factor.

The calculation is:

Equivalent time = starting time × 2stop change

If the stop change is zero, the multiplier is one, so the starting time stays the same. At plus three stops, the multiplier is eight. At minus three stops, it is one eighth. Fractional settings use the same relationship. A half-stop increase multiplies time by the square root of two, approximately 1.414.

The equation isolates shutter time. In a full exposure adjustment, photographers may also change aperture or ISO. If aperture and ISO are held constant, changing shutter time changes the exposure reaching the sensor. If you adjust other settings too, the overall exposure change depends on those adjustments as well.

Use cases for the Shutter Speed Calculator

This conversion can help when translating an exposure adjustment into a shutter-time equivalent. It is useful during planning and when comparing settings, especially if you prefer to reason in stops but your camera displays a fraction or decimal shutter time.

  • Exposure bracketing: estimate shutter times at intervals above or below a starting exposure.
  • Long exposure planning: calculate a longer equivalent time after adding stops, then consider whether a tripod or remote release will help keep the camera steady.
  • Motion studies: compare the mathematical effect of shortening or lengthening the exposure while photographing moving subjects.
  • Learning exposure: see how each stop scales time, including half-stop and third-stop changes.
  • Converting a known setting: enter a familiar shutter time and calculate a new equivalent without manually repeating the doubling or halving.

These are planning uses. The result does not predict whether a moving subject will look sharp or blurred. That appearance depends on subject speed, direction, distance, focal length, camera movement, and the final display size. A short test exposure can show whether the calculated time suits the image you are making.

Other factors to consider when calculating shutter time

Camera shutter controls often use a sequence of standard values, such as fractions of a second. The calculated time may fall between two options. A camera may round to its nearest available increment, or it may let you select a finer value depending on its settings. Check the displayed value after applying the conversion.

Also consider the photographic effect of a longer or shorter exposure. A long time can record movement as blur, and even a stationary scene can blur if the camera shifts. A faster time can reduce movement blur but admits less light through the shutter. Aperture and ISO can be adjusted to balance exposure, though each adjustment also affects depth of field or image noise.

The calculator accepts starting times from 0.0001 to 30 seconds and stop changes from minus 10 to plus 10. Extreme combinations can produce very short or very long calculated times. Treat those results as arithmetic equivalents, since your camera may not support the resulting duration or may require a bulb or time mode for longer exposures. The displayed seconds are rounded to four decimal places, so very short values may need more precision than the output shows.

For long exposures, the scene itself can change while the shutter is open. Moving clouds, water, lights, and people may produce different results over time. The equation assumes only a proportional change in exposure duration. It does not account for sensor behavior at extended exposure lengths, changing light, or specialized techniques such as stacking multiple frames.

Shutter Speed Calculator FAQ

How many seconds is 1/100 second?

One hundredth of a second is 0.01 seconds. Convert a reciprocal shutter speed into seconds by dividing one by its denominator. For instance, 1/250 second is 0.004 seconds.

What does a positive stop change do?

A positive value increases the calculated shutter time. Each added stop doubles the time, so a two-stop change multiplies it by four. If other exposure settings stay fixed, the longer time allows more light to reach the sensor.

Can I enter a fractional stop?

Yes. The exposure change field accepts decimal values, including half stops and third stops. The formula applies the corresponding power of two, so a fractional change scales time by a fractional factor.

Why does the result differ from a camera setting?

The result is a continuous mathematical value, while cameras commonly offer a limited sequence of shutter settings. A camera may round the result to a nearby step. The camera's chosen increment and display determine the setting you can actually use.

Does this calculator choose the right shutter speed for a photo?

No. It calculates an equivalent time from the values you provide. Choosing a shutter speed for a particular photograph also depends on available light, subject movement, camera movement, aperture, ISO, and the visual effect you want.

Written by

unblurai.com Editorial Team

Editorial team

unblurai.com publishes practical how-to guides and educational articles with clear steps and useful context.