The VIVO Extra Tall Single Monitor Desk Stand review is for people who need to raise one display well above a typical desk-level position while keeping the base freestanding.
Its tall center pole and adjustable bracket offer useful positioning options, with a tradeoff: changing height takes a tool-assisted bolt adjustment rather than a quick lift.
VIVO Extra Tall Stand Review Summary
The quick verdict

5,000+ ratings
Read Amazon ReviewsVIVO Extra Tall Single Monitor Desk Stand
A freestanding monitor stand for users who want extra height, broad screen positioning, and a tabletop setup for one compatible display.
- Freestanding design with a steel base and a 40-inch center pole.
- Fits one 13 to 27 inch monitor weighing up to 22 pounds.
- Requires a 75 x 75 mm or 100 x 100 mm VESA mounting pattern on the display.
- Offers +45° to -45° tilt, 180° swivel, and 360° rotation; the display can be used in portrait or landscape orientation.
Pros
- The tall pole makes a higher monitor position the central purpose of the stand.
- Freestanding construction can suit desks where an edge clamp is inconvenient or unwanted.
Consider before buying
- Height changes require a bolt adjustment, so the stand is not designed for quick, repeated vertical repositioning.
- The monitor must fall within the stated size and weight limits and have a compatible VESA pattern.
Read the full review summary
This stand pairs a 40-inch pole with a freestanding steel base, giving a single compatible monitor a raised mounting point without attaching a clamp to the desk.
The bracket supports tilt, swivel, rotation, and height adjustment, while cable management helps route the display’s cords along the stand.
Its design is especially relevant when a desk clamp is not desirable or a taller screen position is the priority.
Check the monitor’s size, weight, and rear VESA pattern before choosing it: the described fit is 13 to 27 inches, up to 22 pounds, and 75 x 75 mm or 100 x 100 mm.
This is better suited to setting a monitor at a chosen height than to work that involves frequent vertical repositioning, because each height change requires loosening and retightening the bracket bolt.
The buying factors
VIVO Extra Tall Stand Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Extra height potential
The 40-inch pole is the defining feature and gives this stand a notably tall support structure.
Monitor compatibility
It supports common 75 x 75 mm and 100 x 100 mm VESA patterns across compatible 13 to 27 inch displays weighing up to 22 pounds.
Viewing angle adjustment
Tilt, swivel, and full rotation provide several ways to orient a mounted screen.
Freestanding flexibility
A tabletop base avoids relying on a desk-edge clamp, though the base still needs a suitable surface area.
Frequent height changes
Height is adjustable, but the bolt must be loosened and tightened, making repeated changes less convenient.
Cable organization
Cable management is included to help keep monitor cords routed neatly along the setup.
Key Features and Specifications of VIVO Extra Tall Stand
- Freestanding design with a steel base and a 40-inch center pole.
- Fits one 13 to 27 inch monitor weighing up to 22 pounds.
- Requires a 75 x 75 mm or 100 x 100 mm VESA mounting pattern on the display.
- Offers +45° to -45° tilt, 180° swivel, and 360° rotation; the display can be used in portrait or landscape orientation.
- Height adjusts along the center pole; adjustment requires loosening and retightening the bracket bolt.
- Includes cable management and mounting hardware, with an open-top slot VESA plate system for installation.
- The product details list a three-year warranty.
Pros and Cons of VIVO Extra Tall Stand
Pros
- The tall pole makes a higher monitor position the central purpose of the stand.
- Freestanding construction can suit desks where an edge clamp is inconvenient or unwanted.
- A broad range of tilt, swivel, and rotation helps tailor the screen angle and orientation.
- Cable management and an open-top VESA plate system support a tidier, more straightforward setup.
Consider before buying
- Height changes require a bolt adjustment, so the stand is not designed for quick, repeated vertical repositioning.
- The monitor must fall within the stated size and weight limits and have a compatible VESA pattern.
- A freestanding base occupies desk surface; check the available footprint and intended monitor position before buying.
Who Should Buy VIVO Extra Tall Stand?
Good fit
Consider the VIVO Extra Tall Stand if your main goal is to raise one compatible screen and keep the mount freestanding.
The tall pole is useful when a conventional stand does not provide the height you want, while the articulated bracket lets you refine tilt, swivel, and screen orientation after installation.
It is a better fit for a setup where the monitor’s height will be chosen during installation and left mostly in place.
Before ordering, confirm the display is within the 13 to 27 inch and 22 pound limits, check for 75 x 75 mm or 100 x 100 mm VESA holes, and make sure the base can sit securely on your desk.
For an uncomplicated setup, the open-top VESA plate design and supplied assembly hardware are practical touches. Cable management is also useful if you want cords guided along the stand rather than hanging freely around the display.
Who should skip it
Look elsewhere if you frequently move the screen up and down during the workday. The bracket’s height adjustment uses a bolt that must be loosened and retightened, rather than a fluid lift mechanism.
This is not the right match for a monitor outside its size, weight, or VESA compatibility limits, or for a two-screen desk arrangement.
Measure the desk area as well if a freestanding base would compete with items you need on the surface.
What the VIVO Extra Tall Stand Means for Your Desk
A tall pole for a deliberate screen position
The 40-inch center pole gives this model a clear use case: lifting one screen to a higher position on a desk.
That extra reach may help when a standard desktop stand leaves the monitor too low, but the pole height alone does not determine the final viewing position.
Your monitor’s mounting point and the height you set along the pole both matter, so think through the intended screen placement before assembly.
The base changes the desk requirements
Because the stand is freestanding, installation does not depend on clamping to a desk edge.
That can be convenient when edge access is limited or a clamp is unsuitable, but the base still needs a stable, open patch of desktop.
Check the area around the desired screen position so the base does not crowd your keyboard, work materials, or other equipment.
Articulation helps after installation
The bracket offers tilt, swivel, and 360-degree rotation, allowing angle changes and portrait or landscape orientation. These adjustments can help align a single screen with a particular task or seating position.
They do not make vertical repositioning equally quick: the height setting requires loosening and tightening the bracket bolt, which makes planned placement a better fit than constant changes.
Compatibility deserves a careful check
Screen size is only one part of the fit. The display also needs to weigh no more than 22 pounds and have a 75 x 75 mm or 100 x 100 mm VESA pattern on the back.
Confirm those details from your monitor’s specifications or by checking its mounting area before buying, then consider whether the screen’s shape and cables will work with your planned portrait or landscape orientation.
Alternatives to VIVO Extra Tall Stand
Computer Monitor Arms alternative

20,000+ ratings
Read Amazon ReviewsVIVO Single Monitor Desk Mount
Choose the Extra Tall Stand when a freestanding base and tall pole suit your workspace. Consider the VIVO Single Monitor Desk Mount if you want a desk-attached setup and need support for a larger compatible display.
- This single-monitor model attaches to the desk with a C-clamp or grommet mount, supports compatible displays up to 38 inches and 22 pounds, and offers up to 16 inches of height adjustment along its center pole.
- The Extra Tall Stand uses a freestanding base and a 40-inch pole, and supports one display up to 27 inches and 22 pounds.
Computer Monitor Arms alternative

60,000+ ratings
Read Amazon ReviewsVIVO Dual Monitor Desk Mount
The Extra Tall Stand is the closer fit if you want one raised display on a freestanding base. Pick the VIVO Dual Monitor Desk Mount if you need two screens and prefer a desk-attached arm arrangement.
- This model supports two monitors, each up to 30 inches and 22 pounds, and mounts to a desk with a C-clamp or optional grommet mount.
- Its arms provide tilt, swivel, and rotation.
- The Extra Tall Stand is a freestanding mount for one compatible screen, with a 40-inch pole and bolt-adjusted height.
Is VIVO Extra Tall Stand Worth It?
The VIVO Extra Tall Single Monitor Desk Stand is worth considering when a tall freestanding mount for one compatible monitor matches your desk and viewing needs.
Its 40-inch pole, angle adjustments, and included cable management make it a purposeful choice for setting a display higher without using a desk-edge clamp.
Buy it if the monitor fits the stated size, weight, and VESA limits, the base has room on your desk, and you are comfortable setting the height with a bolt.
If you expect frequent vertical movement, that adjustment process is the main reason to choose a different style of stand.
Your review at a glance

5,000+ ratings
Read Amazon ReviewsVIVO Extra Tall Single Monitor Desk Stand
A freestanding monitor stand for users who want extra height, broad screen positioning, and a tabletop setup for one compatible display.
- Freestanding design with a steel base and a 40-inch center pole.
- Fits one 13 to 27 inch monitor weighing up to 22 pounds.
- Requires a 75 x 75 mm or 100 x 100 mm VESA mounting pattern on the display.
- Offers +45° to -45° tilt, 180° swivel, and 360° rotation; the display can be used in portrait or landscape orientation.